payday loans

Recommendations on the choice of the gearbox model

  1. In order to place an order according to the available information it is enough to point the gearbox model designation.

  2. At your will, we can select the required gearbox within the available number of serially produced gearboxes. For this purpose you should provide us with the following conditions of gearbox operation at the valve:

    • gearbox type (quarter-turn or multi-turn);

    • necessary loading torque at the output shaft:

      • nominal (long-term acting);

      • maximum (short-term acting);

    • allowable thrust at the flywheel grip under manual mode of operation, or

    • rotational frequency and loading torque at the input shaft of the drive, when the gearbox is operated by the drive;

    • time of opening/closing or gear ratio.

  3. If it is necessary to design a special dimension type of the gearbox because of mounting dimensions, you should enumerate particular parameters of mounting at input and output shafts of the gearbox.